|
Stack Doors are available up to 20' in height. All the
weight of a Stack Door rests on the bottom track. This eliminates the
extensive end wall loading that is required with most vertical lift or
conventional sliding doors. All Horton Stack Doors are designed and
tested for a 25 pound wind load.
Click on Pictures to enlarge them, or click on the link to go to the
detail page!
Door Drawing
Header Requirements
Drip Cap Flashing Detail
Framed Opening Requirements
Hinge Detail
Recess Track Detail (recessed
track provided by others)
Surface mounted track (provided by Stack Door)
1 ¼” x 2” x ¼” angle sits ¼” inside the framed opening with the 2” lip
facing the inside of the building. Pre-punched at the factory, and
Rawl Anchors for mounting are provided.
|
